6103 Exam Questions

When troubleshooting an issue with an ERS 8000, running version 7.2, a technician notices that the "Online" LED is steady amber for longer than 3 minutes. This is an indication of...

Within an STP enabled ERS 8000 switch, what will the vlan create <vid> name <vlan name> type port <instance_id> command create?

To confirm that RSMLT will work on a set of VLANs, which network design aspect should be considered?

On the VSP 9000, there are a maximum of 256 VRRP instances per VRF. What is the maximum number of instances that are allowed on the system?

Which statement describes how to configure Simple Loop Prevention protocol (SLPP) Rx?

Within the context of virtual routing, which statement about the term VRF Lite is true?

Flight Recorder can be used on the Virtual Services Platform (VSP) 9000 to help Identify problems. When can a Flight Recorder snapshot be taken?

The Key Health Indicators (KHI) feature of Avaya Virtual Services Platform 9000 provides a subset of health information that allows for quick assessment of the overall operational...

Which statement describes a characteristic of Routed Split Multilink Trunking (RSMLT) configuration?

After issuing a show mlt ist stats (CLI) or show ist stat (ACLI) command, it is determined that the running type is normal MLT and not IST. What are two causes of the IST not runni...

In the current business environment everyone is being asked to do more with fewer physical resources. Using virtualization allows the Virtual Services Platform (VSP) 9000 to increa...

Refer to the exhibit. While troubleshooting your VSP 9000 system, you run the command flight- recorder all 1. The associated files ace created. Based on the information in the exhi...

Where can someone find the upgrade prerequisites and new features for a particular software release?

On an ERS 8000, which command is used to see the state of an installed interface card?

What will the boot flag ftpd do to your system on startup?

On the VSP 9000 and ERS 8000, the Switch Fabric (SF) modules are installed to intelligently switch or route traffic coming into the chassis. What determines the SF module function...

A technician has installed the Advanced License. After initial configuration of an ERS 8000 system, the technician must also configure VRF for use on the network. Which license ena...

Refer to the exhibit. Simple Loop Prevention Protocol (SLPP) provides active protection against Layer 2 network loops on a per-VLAN basis. For the SLPP Tx process, the network admi...

A customer is concerned about the security of their network. They need to understand the OSPF authentication options when accepting route updates in OSPF. Currently, their Virtual...

A customer is mirroring multiple ports to a single monitor port. What happens if the mirrored traffic exceeds the bandwidth of the monitor port?

On an ERS 8000 system that is configured for use with IPv6, which command would show whether or not the VRRP instance is configured correctly on a particular interface?

An engineer is configuring the VSP 9000 for EDM management, and cannot connect from the EDM computer to the VSP 9000. Once logged into the ACLI, which show command is used to see t...

Refer to the exhibit. After checking the VLAN configuration using the show vlan info basic, and the show vlan info port commands, there are no ACTIVE MEMBER ports for VLAN-50. What...

After a chassis failure, you replace the Avaya Ethernet Routing Switch 8800/8600 with a new chassis that has a new base MAC address. To transfer the existing license to this new ch...

Which CLI command is used to allow the non-secure (HTTP) web interface?

Which statement about the local router MAC addresses on RSMLT aggregation switches (cluster) is true?

A technician is implementing a new network that contains eight Ethernet Routing Switch (ERS) 8000 switches, and also uses advanced features. One of the eight switches will run Shor...

Avaya Command Line Interface (ACLI) is an industry standard CLI that can be used to manage the Virtual Services Platform (VSP) 9000. From within which CLI context would you enable...

A technician is configuring a Link Aggregation connection from a stack of Ethernet Routing Switch (ERS) 5500 switches, to a core pair of ERS 8000 switches. Which statement about th...

Both the VSP 9000 and ERS 8000 systems support Custom Auto-Negotiation Advertisements (CANA). These advertisement messages are used by both ends of a link. What information do thes...

Which function does the "RS" module for the ERS 8000 provide that the "R" module does not?

EAPOL and 802.1X are examples of which kind of security within the ERS8000?

In a VSP 9000 chassis, which command is used to see the information on the installed software?

Which multicast technology, used with the Virtual Services Platform (VSP) 9000, allows the router to determine whether any group members exist on its directly connected networks an...

The attempt to manage an Ethernet Routing Switch (ERS) 8000 using a VRRP address was unsuccessful. What is causing this problem?

Once created, which ACLI command line syntax is used to see that an instance of VRF is configured correctly?

Which two management ports are available on the VSP 9000 CP module? (Choose two.)

Source MAC address-based VLANs are an example of which group of VLAN types?

Refer to the exhibit. The EDM is used to see the configured routes within your system. Based on the information in the exhibit, what is the problem with the route to the 10.0.0.0 n...

A customer has a edge switch connected to a cluster of VSP 9000 switches. The uplinks to the network core are via two Gigabit uplink ports. The uplinks are not aggregated and are r...

While troubleshooting the VSP 9000 system, a technician notices that one port Link/Activity LED is blinking constantly or is nearly solid. This could be an indication of mis-config...

A customer is expressing concern about reliability for their single uplink connections to the wiring closet. The switches in the wiring closet support Distributed Multi-Link Trunki...

Once you have enabled the web server within the system for EDM access, what is the syntax to allow only secure connections?

QoS is the ability to manage the performance of data flows by giving treatment to the data flows, users, and applications. For which two network problems would QoS be a good soluti...

Which command mode contains the commands needed to work on software licenses?

Given the following error message: Power Supply Down(PsID=1,OperStatus=4) What does the error message mean regarding the power supply?

Which file on the internal flash of Avaya Virtual Services Platform 9000 is used to specify the primary and backup release names?

Which ACLI command is used to display SMLT port configuration?

A company has a virtualized computing environment, and their VSP 9000 can be configured so that the ports are considered "lossless" in their redundant network design. Which two tra...

Which CLI command is used to validate that synchronization for High Availability mode is correct?