5V0-22.21 Exam Questions
160 real 5V0-22.21 exam questions with expert-verified answers and explanations. Page 1 of 4.
- Question #1Deploy and Configure VMware HCI
After a recent security assessment, the security team recommended that vSAN encryption be enabled. The vSAN administrator will be adding a Key Management Server to vCenter. What is...
vSAN encryptionKMSManageKeyServer permissionsdata-at-rest encryption - Question #2Planning and Design VMware HCI Implementations
A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleagues inquire about the Operations Reser...
ReadyNode Sizeroperations reservecapacity planningsizing tool - Question #3Planning and Design VMware HCI Implementations
A customer is running a number of compute-intensive application workloads on their existing 4- node vSAN cluster that has resulted in resource contention. To provide additional com...
HCI Meshcompute-only clusterstorage policyerasure coding - Question #4VMware HCI Platform and Architecture
A 100GB virtual disk object has this storage policy assigned to it: - Site disaster tolerance: None -standard cluster - Failures to Tolerate: 1 failure -RAID-1 (Mirroring) - Number...
storage policyRAID-1 mirroringcapacity calculationdisk stripes - Question #5Troubleshoot and Repair VMware HCI
A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be pl...
hybrid vSANstripe widthperformance tuningmagnetic capacity devices - Question #6Deploy and Configure VMware HCI
An administrator has deployed a development VMware vSAN 7.0 U1 cluster. It will be used by the development teams to deploy a mixture of cloud-native stateful applications alongside...
vDPpcloud-native storageKubernetesshared nothing architecture - Question #7Optimize and Scale VMware HCI
A vSAN administrator has recently upgraded a vSAN cluster to 7.0 U1 and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild op...
capacity reserverebuild thresholdslack spacevSAN 7.0 U1 - Question #8Troubleshoot and Repair VMware HCI
A vSAN administrator notices the VMware Skyline Health: Network Latency Check reports indicate three hosts are non-compliant. Which action should the vSAN administrator take?
Skyline Healthnetwork latencyVMKNICscluster health check - Question #9
An administrator is responsible for managing a 5-node vSAN 7.0 cluster that hosts 150 virtual machines. Each virtual machine belongs to one of the following vSAN Storage Policies:...
- Question #10VMware HCI Platform and Architecture
After a recent data loss event, the IT department plans to deploy a DR site using vSphere Replication with vSAN providing the storage backend. The architect would like to know how...
vSphere Replicationcomponent calculationpoint-in-time snapshotsRAID-1 - Question #11VMware HCI Platform and Architecture
In vSAN 7.0 U1, when a host enters into maintenance mode (EMM) using the "Ensure Accessibility" option, it will allow vSAN to write to another host in addition to the host holding...
maintenance modeEnsure Accessibilityincremental updatesobject replica - Question #12Troubleshoot and Repair VMware HCI
A vSAN administrator received the following alert from vRealize Operations Manager: "VMKernel NIC is experiencing high number of dropped packets." What is the quickest path in vRea...
vRealize Operationsdropped packetsalert investigationnetwork monitoring - Question #13Troubleshoot and Repair VMware HCI
A single capacity disk fails within a vSAN 7.0 U1 cluster running with a "compression-only" configuration enabled. The vSAN administrator must recognize the platform impact that ha...
compression-onlycapacity disk failuredisk group impactdata availability - Question #14Administer and Operate VMware HCI
A vSAN administrator of a network isolated vSAN environment wants to upgrade the environment from the vSAN 7.0 to the vSAN 7.0 U1 using vLCM. Which option, if any, should be used a...
vLCMUMDSisolated environment upgradedepot configuration - Question #15VMware HCI Platform and Architecture
An organization wants to configure a new storage policy based on the following requirements: Failures to tolerate = FTT 1/RAID-5 (Erasure Coding) Number of disk stripes per object...
RAID-5 erasure codingstorage policycomponent calculationdisk stripes - Question #16Administer and Operate VMware HCI
A vSphere administrator wants to use vSphere Lifecycle Manager (vLCM) to manage a vSAN cluster with one desired image. When creating the new cluster, the administrator chooses "Man...
vLCMdesired imagecluster image importlifecycle management - Question #17Administer and Operate VMware HCI
Which vSAN advanced setting can be adjusted to avoid rebuild operations during a host hardware maintenance window that is expected to exceed 90 minutes?
Object Repair Timerrebuild operationsmaintenance windowadvanced settings - Question #18Deploy and Configure VMware HCI
The DevOps team of an organization wants to deploy their new cloud native application with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to co...
vSAN Directcloud-native applicationsunclaimed disksvSAN license - Question #19VMware HCI Platform and Architecture
What os the maximum number of 2-node clusters that can share a vSAN Shared Witness host in vSAN 7.0 U1?
vSAN Shared Witness2-node clusterscaling limitsvSAN 7.0 U1 - Question #20Deploy and Configure VMware HCI
An administrator is enabling vSphere HA and vSAN on the same cluster and needs to use a configuration that is valid for vSphere HA Heartbeat datastore. Which configuration should b...
vSphere HAHeartbeat datastorevSAN integrationHA configuration - Question #21Administer and Operate VMware HCI
An administrator has been tasked with physically moving the hosts in a vSAN 7.0 U1 cluster to an alternative location. All virtual machines, hosts, and the vCenter Server have need...
cluster startup procedureMaintenance Modehost relocationvSAN recovery - Question #22
A vSAN administrator wants to install a patch on an existing vSAN cluster. The environment runs vSphere 7.0, and the patch contains ESXi 7.0 Update 1c. The vSAN administrator will...
- Question #23Troubleshoot and Repair VMware HCI
An administrator has successfully deployed a new 3-node vSAN Cluster. Prior to deploying any production workloads on to the new cluster, the administrator must complete a number of...
disk removalabsent componentsrepair delaycomponent rebuild - Question #24Troubleshoot and Repair VMware HCI
A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive until the next morning. The administrator needs to ensure the availability of th...
NIC failureFull Data MigrationMaintenance Modeworkload availability - Question #25Troubleshoot and Repair VMware HCI
A vSAN administrator observes that the VMware Skyline Health: Time Synchronization displays one host that is noncompliant. What is the meaning of this message?
Skyline HealthNTP synchronizationtime sync compliancehealth monitoring - Question #26Administer and Operate VMware HCI
A vSAN administrator is tasked to perform an upgrade of a vSAN cluster from 7.0 to 7.0 U2, including firmware and drivers for its hardware. The vSAN administrator already created a...
vLCMcluster upgradefirmware remediationvSAN lifecycle - Question #27Administer and Operate VMware HCI
Which state is NOT a compliance status of a VM Storage Policy?
VM Storage Policycompliance statuspolicy management - Question #28Troubleshoot and Repair VMware HCI
When viewing the VMware Skyline Health: vSAN Object Health report, the vSAN administrator observes that the link "Repair Objects Immediately" is enabled. What is the meaning of thi...
Skyline Healthobject healthabsent componentsrepair trigger - Question #29
The cluster level backend IOPS performance graph shows a higher-than-average number of IOPS for back-end storage. What is a possible reason for this situation?
- Question #30Optimize and Scale VMware HCI
A site administrator has determined that the site needs to upgrade all vSAN clusters to 7.0 U1. The vSAN administrator wishes to complete the update in the shortest amount of time...
cluster upgradeon-disk formatdata migrationupgrade strategy - Question #31Planning and Design VMware HCI Implementations
What is the maximum network latency round-trip time (RTT) requirement for vSAN stretched clusters from data site to data site?
stretched clusternetwork latencyRTT requirementsite design - Question #32
When would disabling Read Locality be beneficial for a 2-node vSAN?
- Question #33
When attempting to add a directly attached disk device to a host disk group, the intended disk does not show among the available devices in disk management. Which action can be use...
- Question #34
Refer to the exhibit. What is the minimum number of data nodes across all sites in a vSAN stretched cluster configuration with the above storage policy?
- Question #35
A vSAN administrator is working with a network administrator to design a highly resilient all-flash vSAN cluster. Which design factor allows for a highly resilient vSAN network?
- Question #36
When should an administrator enable Resynchronization Throttling?
- Question #37
vSAN Health shows a warning icon next to vSAN Disk Balance health check. What can be done to fix this issue?
- Question #38
An administrator is designing a vSAN cluster for performance driven workloads. Which design decision will provide more I/O paths to the vSAN cluster?
- Question #39VMware HCI Platform and Architecture
A group of vSAN components that reside on a failed drive are marked degraded. How long does vSAN wait by default, before rebuilding these components on other healthy drives in the...
degraded componentsrepair delayCLOMRepairDelaycomponent rebuild - Question #40Deploy and Configure VMware HCI
Which two object space reservation choices are available when deduplication and compression are enabled? (Choose two.)
object space reservationdeduplicationcompressionthin provisioning - Question #41Planning and Design VMware HCI Implementations
Refer to the red question mark in the exhibit. When designing a 2-node vSAN cluster, which missing configuration requirement prevents a split-brain scenario?
2-node clustervSAN Witnesssplit-brain preventioncluster design - Question #42
A vSAN administrator, who has a cluster that has both compute-only and vSAN ReadyNodes, recently received a request to deploy a new application with higher storage performance requ...
- Question #43Deploy and Configure VMware HCI
An administrator is tasked with configuring vSAN Cloud Native Storage. Which two requirements must be met for a successful configuration? (Choose two.)
Cloud Native StorageKubernetesvSphere requirementsCNS configuration - Question #44Troubleshoot and Repair VMware HCI
When attempting to add a directly attached disk device to a host disk group, the intended disk does not show among the available devices in disk management. Which action should be...
disk grouppartition cleanupdisk availabilitydisk management - Question #45Administer and Operate VMware HCI
An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this spa...
TRIM/UNMAPspace reclamationthin provisioningstorage efficiency - Question #46Administer and Operate VMware HCI
A vSAN administrator is noticing that the objects resynchronizing in the cluster are taking longer than expected and wants to view the resynchronizing metrics. Which performance ca...
resynchronizationbackend performanceperformance metricsmonitoring - Question #47Deploy and Configure VMware HCI
Which two characteristics are associated with vSAN Data-In-Transit Encryption? (Choose two.)
Data-In-Transit encryptionAES-256encryption independencevSAN security - Question #48
An administrator must choose between deploying a virtual witness or physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness. Wh...
- Question #49Administer and Operate VMware HCI
Which tool should be used to identify vSAN unassociated objects?
unassociated objectsPowerCLIvSAN object healthmanagement tools - Question #50Administer and Operate VMware HCI
What are two purposes of a vSAN storage policy (Choose two.)
vSAN storage policyVM object provisioningservice level guaranteepolicy purpose