500-006 Exam Questions
85 real 500-006 exam questions with expert-verified answers and explanations. Page 1 of 2.
- Question #1
Which Cisco TelePresence C Series Codec command will move the on-screen display to monitor output 4?
- Question #2
Which menu on the Cisco TelePresence VCS should you refer to in order to verify that an endpoint has registered?
- Question #3
After you change the IP address of a Cisco TelePresence Codec C90, you are unable to use Telnet or a browser to connect to that address. However, you are able to use ping to connec...
- Question #4
The camera remote control is not responding. What can an engineer check in order to determine if the camera remote control or the system is causing the problem?
- Question #5
On a Cisco TelePresence CLI, which command is the correct syntax to run a traceroute to a remote host?
- Question #6
How many CTMS can be configured in Cisco TelePresence Manger?
- Question #7
Which device will cause a Cisco TelePresence call to drop if the device is not properly cabled?
- Question #8
What will happen if the local zone on a Cisco TelePresence VCS does not have a search rule?
- Question #9
How can you independently restore the default links on a Cisco TelePresence VCS?
- Question #10
What should you use to back up the configuration of a Cisco TelePresence VCS (X5 software or above)?
- Question #11
Which troubleshooting tools are available on the Cisco TelePresence VCS (X5 or above)?
- Question #12
Where do you find the Clusterwide Domain Configuration?
- Question #13
Where do you change the Maximum Session Bit Rate for Video Calls?
- Question #14
How many peers can you configure per neighbor zone?
- Question #15
When trunking a Cisco VCS to Cisco Unified Communications Manager, what value should the
- Question #16
Calls from Cisco VCS registered endpoints are not reaching Cisco Unified Communications Manager registered endpoints. Where should you look on Cisco VCS to troubleshoot?
- Question #17
Endpoints can be placed into different Cisco TelePresence VCS (X5 or above) subzones according to which of the following?
- Question #18
Which Cisco TelePresence VCS function can you use to control the speed of a call within the same subzone?
- Question #19
Two Cisco TelePresence VCSs are not configured with DNS. What are the consequences of only setting up one neighbor zone?
- Question #20
What does the hop count setting on the firewall traversal configuration limit on the Cisco TelePresence VCS?
- Question #21
When can a transform rule be applied on a Cisco TelePresence VCS?
- Question #22
How will FindMe help a user working from either home or the office?
- Question #23
Which Cisco TelePresence VCS function is used to enable H.323 endpoints to connect to SIP endpoints?
- Question #24
What information about a change can you determine from the configuration log on a Cisco TelePresence VCS?
- Question #25
What do you need to do in order to prevent browsers from generating warnings about certificates when they access the Cisco TelePresence VCS?
- Question #26
Which feature must be enabled on the Cisco TelePresence VCS in order to monitor the status of non-presence-enabled clients?
- Question #27
Which user groups on the Cisco TelePresence VCS are available for LDAP integration?
- Question #28
Which regular expression matches 50440123 and 4044123, but not 60440123?
- Question #29
What type of DNS record is required for URI dialing?
- Question #30
What does it mean when an endpoint is Multiway-enabled?
- Question #31
What will happen if you make configuration changes to a VCS peer in a cluster that is not the master?
- Question #32
In which order will pre-search operations occur on a Cisco TelePresence VCS?
- Question #33
How many peer relationships are required to implement a hierarchical dial plan for a network of 6 regional VCS controls?
- Question #34
Which statement is true about the registration restriction policy within the Cisco TelePresence VCS?
- Question #35
Which statement is correct about the configuration of the call control device?
- Question #36
What needs to be configured for Endpoint A, registered to Cisco Unified Communications Manager, to dial Endpoint B, registered to Cisco VCS?
- Question #37
How many Cisco VCSs can be in a single cluster?
- Question #38
In which three areas can the Cisco VCS be configured to use an external policy server? (Choose three.)
- Question #39
A Cisco VCS has a search rule that uses the pattern string of ([78]\d1\d+|Meet\..*). Which three dial strings will match the search rule? (Choose three.)
- Question #40
What two protocols are used in firewall traversal? (Choose two).
- Question #41
What does an MCU service prefix of 8 mean for users of a Cisco TelePresence MCU?
- Question #42
What does an endpoint system use to navigate the Auto Attendant menu on the Cisco TelePresence MCU?
- Question #43
What software can you use to customize the banner on the Cisco TelePresence MCU?
- Question #44
A customer wants to allow users to create ad hoc conferences by dialing the Cisco TelePresence MCU service prefix of 8, followed by a number for the conference. Which global confer...
- Question #45
Why would an endpoint stop sending 720p in a call with a Cisco TelePresence MCU?
- Question #46
Which command is used to set the IP configuration for a Cisco TelePresence MCU?
- Question #47
How do you know that all blades on the Cisco TelePresence MSE 8000 have booted correctly?
- Question #48
A Cisco TelePresence MCU Auto Attendant does not allow users to set up ad hoc conferences, even though the media port reservation setting is off. What may cause this problem?
- Question #49
Which three methods can an engineer use to upgrade the software on the Cisco TelePresence MCU? (Choose three.)
- Question #50
Which three protocols does Cisco TelePresence Server support? (Choose three.)