350-601 · Question #111
Which action must be performed before renumbering a Cisco UCS chassis?
The correct answer is C. Decommission the chassis. Decommissioning is performed when a chassis is physically present and connected but you want to temporarily remove it from the Cisco UCS Manager configuration. Because it is expected that a decommissioned chassis will be eventually recommissioned, a portion of the chassis'…
Question
Which action must be performed before renumbering a Cisco UCS chassis?
Options
- ARun the shut and no shut command on the connected ports.
- BMove the chassis to new ports on fabric interconnect.
- CDecommission the chassis.
- DRe-acknowledge the chassis.
How the community answered
(36 responses)- A3% (1)
- C94% (34)
- D3% (1)
Explanation
Decommissioning is performed when a chassis is physically present and connected but you want to temporarily remove it from the Cisco UCS Manager configuration. Because it is expected that a decommissioned chassis will be eventually recommissioned, a portion of the chassis' information is retained by Cisco UCS Manager for future use. Renumbering a Chassis - Before You Begin - If you are swapping IDs between chassis, you must first decommission both chassis, then wait for the chassis decommission FSM to complete before proceeding with the renumbering steps. 0/b_UCSM_CLI_User_Guide_3_0/b_UCSM_CLI_User_Guide_3_0_chapter_0100011.pdf
Topics
Community Discussion
No community discussion yet for this question.