You need to open the appropriate firewall port for RLDP. Which port must you open?

Question

Options

• AUDP 6352
• BUDP 5246
• CTCP 37540
• DTCP 8443
• ETCP 16113
• FUDP 16666

• A
  85% (41)
• B
  8% (4)
• D
  4% (2)
• F
  2% (1)

Explanation

Rogue Location Discovery Protocol (RLDP) is an active approach, which is used when rogue AP has no authentication (Open Authentication) configured. This mode, which is disabled by default, instructs an active AP to move to the rogue channel and connect to the rogue as a client. During this time, the active AP sends de-authentication messages to all connected clients and then shuts down the radio interface. Then, it associates to the rogue AP as a client. The AP then tries to obtain an IP address from the rogue AP and forwards a User Datagram Protocol (UDP) packet (port 6352) that contains the local AP and rogue connection information to the controller through the rogue AP. If the controller receives this packet, the alarm is set to notify the network administrator that a rogue AP was discovered on the wired network with the RLDP feature.

No community discussion yet for this question.