350-050 · Question #253
A network administrator is trying to convert a Cisco Aironet 1250 Series Lightweight Access Point back to autonomous mode using a TFTP server and AP mode button. DHCP Option 43 is configured, but…
The correct answer is B. The image filename is incorrect. See the full explanation below for the reasoning.
Question
A network administrator is trying to convert a Cisco Aironet 1250 Series Lightweight Access Point back to autonomous mode using a TFTP server and AP mode button. DHCP Option 43 is configured, but the AP is not connected to the controller. Console and physical access to the AP has been established. The TFTP server is local to the PC and the directory has the original image of "c1250-k9w7-tar.124-10b.JDA3.tar," downloaded from Cisco.com. The PC is directly connected to the access point, but the conversion is failing. Which one of these statements is a possible reason for the failure?
Options
- AThe 1250 Series AP is a lightweight-only AP and needs a WLC.
- BThe image filename is incorrect.
- CThe lightweight AP has to be joined to the WLC and then converted, using the config ap tftp- downgrade
- DTelnet is not enabled on the AP or WLC.
- EThe network administrator needs to use the archive command directly on the AP for this procedure to complete.
How the community answered
(16 responses)- A6% (1)
- B75% (12)
- D13% (2)
- E6% (1)
Community Discussion
No community discussion yet for this question.