nerdexam
Cisco

300-170 · Question #114

Which situation causes POAP to auto provision a switch?

The correct answer is C. The startup configuration is missing. PowerOn Auto Provisioning (POAP) on a Cisco Nexus switch is triggered when the device boots up and detects that the startup configuration is missing from its persistent storage.

Automation and Orchestration

Question

Which situation causes POAP to auto provision a switch?

Options

  • AThe startup configuration is corrupt.
  • BThe switch is powered on after being offline for more than 48 hours.
  • CThe startup configuration is missing.
  • DThe startup configuration is corrupt, and you manually rebooted the switch

How the community answered

(64 responses)
  • A
    2% (1)
  • B
    5% (3)
  • C
    92% (59)
  • D
    2% (1)

Why each option

PowerOn Auto Provisioning (POAP) on a Cisco Nexus switch is triggered when the device boots up and detects that the startup configuration is missing from its persistent storage.

AThe startup configuration is corrupt.

If the startup configuration is corrupt but present, POAP may not activate; the switch might attempt to load it, or enter a recovery mode, but not necessarily POAP for auto-provisioning.

BThe switch is powered on after being offline for more than 48 hours.

The duration a switch has been offline (e.g., more than 48 hours) does not by itself trigger POAP; POAP is primarily based on the presence or absence of a valid startup configuration.

CThe startup configuration is missing.Correct

POAP (PowerOn Auto Provisioning) is designed to automatically provision a Cisco Nexus switch when it powers on and detects the absence of a startup configuration file in its persistent memory, initiating a network-based configuration process.

DThe startup configuration is corrupt, and you manually rebooted the switch

While a corrupt startup configuration can cause issues, simply rebooting does not trigger POAP; the key condition is the absence of any valid startup configuration, not corruption coupled with a manual reboot.

Concept tested: Cisco Nexus POAP trigger conditions

Source: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/fundamentals/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide_7x_chapter_010.html#concept_370F200A526E4017AE3829029DC3DAA8

Topics

#POAP#auto-provisioning#Cisco Nexus

Community Discussion

No community discussion yet for this question.

Full 300-170 Practice