2V0-41.19 Exam Questions
95 real 2V0-41.19 exam questions with expert-verified answers and explanations. Page 1 of 2.
- Question #1Section 7 – Troubleshoot vRealize Automation
Which two commands are used to query the arp-table of a logical switch? (Choose two.)
logical switchARP tableNSX-T CLInetwork troubleshooting - Question #2Section 3 – Deploy and Manage vRealize Automation Infrastructure and Endpoints
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?
Tier-0 Gatewaystateful servicesSR instantiationNSX Edge - Question #3Section 3 – Deploy and Manage vRealize Automation Infrastructure and Endpoints
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
NATTier-0 GatewaySNAToutbound connectivity - Question #5Section 3 – Deploy and Manage vRealize Automation Infrastructure and Endpoints
What are two supported VPN configuration types in a NSX-Y Data Center? (Choose two.)
VPN typesL3VPNSSLVPNNSX-T networking - Question #6Section 3 – Deploy and Manage vRealize Automation Infrastructure and Endpoints
An NSX administrator is applying QoS to guarantee bandwidth for critical production workloads. Which three actions must be taken? (Choose three.)
QoSNIOC profilesegment profilebandwidth guarantee - Question #7Section 6 – NSX-T Administrative and Operational Tasks
A customer is planning deployment of a third-party OpenStack application. Which is used to grant permissions to the application on NSX Manager?
API identityNSX Manager authenticationOpenStack integrationprincipal identity - Question #8Section 1 – NSX-T Architecture and Technologies
What are three functions of a Tier-0 Gateway in a multi-tenant service provider environment? (Choose three.)
Tier-0 Gatewaymulti-tenant architecturenorth-south routingservice provider - Question #10Section 1 – NSX-T Architecture and Technologies
What are the supported N-VDS modes?
N-VDSEnhanced DatapathStandard Datapathdatapath modes - Question #11Section 3 – NSX-T Installation, Configuration, and Setup
A NSX-T Data Center administrator wants to ensure that any machine on a public network can communicate with a Web VM running in a NSX-T Data Center environment. Which NAT type must...
NATDNATTier-0 Gatewaypublic network access - Question #13Section 6 – NSX-T Administrative and Operational Tasks
What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?
RBACNSX rolesNetwork Engineerleast privilege - Question #14Section 1 – NSX-T Architecture and Technologies
What is the maximum supported ECMP paths in NSX-T 2.4 Data Center?
ECMPmaximum pathsNSX-T 2.4routing - Question #15Section 3 – NSX-T Installation, Configuration, and Setup
Refer to the exhibit. An administrator Is trying to configure a medium load balancer in a production environment, but is getting the error message shown in the exhibit. Which step...
load balancerNSX Edgemanagement plane joinCLI configuration - Question #17Section 6 – NSX-T Administrative and Operational Tasks
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events. Which message ID (msgid) should be used in the syslog export c...
syslogFABRIC msgidhost preparationlog export - Question #18Section 1 – NSX-T Architecture and Technologies
What are three NSX Manager roles? (Choose three.)
NSX Manager clustermanager rolepolicy rolecontroller role - Question #19Section 5 – NSX-T Troubleshooting and Repairing
Which network tool cloud an administrator use on an ESXi 6.7 host to capture packets when troubleshooting connectivity issues?
packet capturepktcap-uwESXi troubleshootingconnectivity - Question #20Section 4 – NSX-T Performance-tuning, Optimization, and Upgrades
Which three hardware-based offloads provide maximum performance for physical network interface cards? (Choose three.)
hardware offloadRSSTSOLRO - Question #21Section 5 – NSX-T Troubleshooting and Repairing
Which two commands could be used on an ESXI transport node to validate connectivity to the NSX Manager? (Choose two.)
transport nodeNSX Manager connectivityport 5671AMQP validation - Question #22Section 1 – NSX-T Architecture and Technologies
Which two statements describe the characteristics of the Services Router (SR) component of a Tier-0 Gateway? (Choose two.)
Services RouterTier-0 GatewayEdge clusterSR instantiation - Question #23Section 6 – NSX-T Administrative and Operational Tasks
Which statement Is true regarding the audit user account? (Choose two.)
audit userNSX Manager accountsuser managementaccess control - Question #24Section 3 – NSX-T Installation, Configuration, and Setup
An NSX administrator is migrating vSphere port groups configured in vSphere to N-VDS. What are two migration options? (Choose two.)
N-VDS migrationvSphere port groupsPNIC migrationhost configuration - Question #25Section 1 – NSX-T Architecture and Technologies
What is the function of a domain in a NSX-T Data Center?
domainsecurity policy scopeNSX-T architecturegrouping - Question #26Section 1 – NSX-T Architecture and Technologies
Which port is used by a transport node to communicate with NSX Manager in NSX-T Data Center 2.4?
transport nodeNSX Manager communicationuplink teamingload balancing - Question #28Section 1 – NSX-T Architecture and Technologies
Which two logical router components span across all transport nodes? (Choose two.)
distributed routerDR componentTier-0Tier-1 - Question #29Section 2 – NSX-T Planning and Design
What is VMware's recommendation for the minimum MTU requirements when planning a NSX-T Data Center deployment?
MTUoverlay networkdeployment planningGENEVE encapsulation - Question #30Section 3 – NSX-T Installation, Configuration, and Setup
An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing. Which failover detection protocol must be used to meet this requirement?
ECMPBFDTier-0 Gatewayfailover detection - Question #31Section 5 – NSX-T Troubleshooting and Repairing
An NSX administrator is reviewing syslog and notices that Distributed Firewall Rules hit counts are not being logged. What could cause this issue?
Distributed Firewallsyslogloggingtransport node - Question #32Section 3 – NSX-T Installation, Configuration, and Setup
A company is deploying a NSX-T Data Center micro-segmentation in their vSphere environment to allow simple 3-tier app forms through web, app, and database. The naming convention wi...
micro-segmentationsecurity groupstagging3-tier app - Question #33Section 1 – NSX-T Architecture and Technologies
The NSX Control Plane is responsible for which two functions? (Choose two.)
control planeforwarding enginestopology propagationNSX architecture - Question #34Section 5 – NSX-T Troubleshooting and Repairing
The security administrator turns on logging for a firewall rule. Where is the log stored on ESXi and KVM transport nodes?
firewall loggingdfwpktlogsESXi log pathKVM log path - Question #35Section 6 – NSX-T Administrative and Operational Tasks
Which visual tool within the NSX User Interface should an administrator use to monitor hop-by-hop connectivity between two virtual machines or logical ports?
Port Connectionconnectivity monitoringhop-by-hopNSX UI - Question #36Section 6 – NSX-T Administrative and Operational Tasks
An NSX administrator would like to configure syslog for a KVM transport node. Which host log files could be exported to a remote syslog server?
syslogKVM transport nodelog filesremote syslog - Question #37Section 5 – NSX-T Troubleshooting and Repairing
Refer to the exhibit. A vSphere administrator is trying to connect T1-Web-01 virtual machine to a NSX-T logical switch and is receiving an error. Which service must be restarted to...
nsx-opsagentlogical switchKVM servicetroubleshooting - Question #38Section 3 – NSX-T Installation, Configuration, and Setup
Which three steps must be taken to assign a new IP address to a member of a NSX Management Cluster that was deployed manually? (Choose three.)
NSX Management ClusterIP reassignmentcluster nodemanual deployment - Question #39Section 3 – NSX-T Installation, Configuration, and Setup
What is required to configure a load balancer in inline mode?
load balancerinline modeTier-1 GatewaySNAT - Question #40Section 5 – NSX-T Troubleshooting and Repairing
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
GENEVE tunnelESXi CLItransport nodetunnel status - Question #41Section 4 – NSX-T Performance-tuning, Optimization, and Upgrades
In a NSX-T Data Center environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers. Which two actions coul...
Tier-0 GatewayECMPthroughput optimizationEdge node sizing - Question #42Section 3 – NSX-T Installation, Configuration, and Setup
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?
NSX Management ClusterKVM vswitchnsx-vswitchHA deployment - Question #44Section 1 – NSX-T Architecture and Technologies
Which two IP Discovery mechanisms are supported in KVM-environments? (Choose two.)
IP DiscoveryDHCP snoopingARP snoopingKVM - Question #45Section 3 – NSX-T Installation, Configuration, and Setup
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode. Which two NAT rule types are supported for this configuration?...
NATTier-0 Gatewayactive-standbySNAT DNAT - Question #46Section 5 – NSX-T Troubleshooting and Repairing
Which command on ESXi Is used to verify the Local Control Plane connectivity with Central Control Plane?
Local Control PlaneCentral Control PlaneESXi CLInetcpa - Question #47Section 3 – NSX-T Installation, Configuration, and Setup
Which is correct when deploying a NSX Edge in a KVM only environment?
NSX EdgeKVM deploymentbare-metalQCOW2 - Question #48Section 5 – NSX-T Troubleshooting and Repairing
Refer to the exhibit. The Node Status for all hosts in the SA-Compute-01 cluster Is shown as Not Configured. There are no VM connectivity issues reported on any of the ESXI transpo...
cm-inventoryNode StatusNSX Manager servicetroubleshooting - Question #49Section 1 – NSX-T Architecture and Technologies
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
RouterLink portTier-0 GatewayTier-1 Gatewaygateway connectivity - Question #50Section 6 – NSX-T Administrative and Operational Tasks
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
KVM hypervisorvirshVM interface UUIDCLI - Question #51Section 5 – NSX-T Troubleshooting and Repairing
Which two built-in VMware tools will help identify the cause of packet loss on VLAN Segments? (Choose two.)
packet lossVLAN segmentsTraceflowPacket Capture - Question #52Section 3 – NSX-T Installation, Configuration, and Setup
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center. What is the minimum MTU size for the UPLINK profile?
MTUUPLINK profileKubernetestransport node - Question #53Section 1 – NSX-T Architecture and Technologies
Which component does the hyperbus interface (vmk50) provide network connectivity to?
hyperbusvmk50transport nodesnetwork connectivity - Question #54Section 5 – NSX-T Troubleshooting and Repairing
An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router. What sequence of commands could be used to check this stat...
BGPTier-0 GatewayEdge node CLIrouting status - Question #55Section 5 – NSX-T Troubleshooting and Repairing
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node. Which feature in the NSX Manager Simplified UI shows the mappi...
N-VDS VisualizationESXi transport nodevNIC mappingNSX Manager UI - Question #56Section 1 – NSX-T Architecture and Technologies
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.) I
Tier-0 GatewayECMPload balancingnorth-south bandwidth