220-301 Exam Questions

A client reports receiving buffer underrun error messages every time they try to burn a CD-RW. Which two actions should be taken to fix the client problem? (Select TWO)

What is the normal default SCSI ID for a Narrow SCSI adapter card?

When considering upgrading RAM on a legacy computer, what determines the memory supported by the PC?

For a generic desktop computer, what does one short beep after the unit completes POST indicate?

A user wants to listen to a CD on a computer running Windows 2000. However, when it starts playing there is no sound coming from the speakers. A technician verifies that the speake...

What is the appropriate method for cleaning dirt, dust, and fingerprints off of CDs?

What is the purpose of MSDS (material safety data sheets)?

Which is a logic circuitry that responds to basic instructions that drive a computer?

A laptop computer has two stacked PCMCIA slots. Given only this information, which three of the following card configurations are MOST likely supported? (Select THREE)

A technician must enable Int13h support on a SCSI controller card in order to use which device?

Which two printing technologies use a beam of light to draw an image on a photo-conductive drum? (Select TWO)

What is the number of devices per Fast-Wide SCSI-2 Bus?

What is the minimum number of drives required for RAID Level 5?

When using a SCSI cable with multiple connectors, what MUST connect to the end of the cable, opposite the controller card, in order for the attached devices to work properly?

A networked PC has SERVER as its NetBIOS name. It has a locally attached printer on LPT1, which is shared across the network called LASER1. What is the UNC path from all other work...

A client calls complaining that a computer does not boot into Windows. Safe Mode is available and the anti-virus software is up to date. What question should the client be asked no...

What is IEEE 1394b also known as?

A client wants to connect a digital camera to a desktop computer system. What are the two MOST common interface types found on digital cameras? (Select TWO)

Which of the following hot-swappable technology is MOST commonly used in portable computers for adding peripheral devices for storage, communication, and other I/O components?

A technician must enable Int13h support on a SCSI controller card in order to use which device?

Which two of the following motherboard components are FRUs (field replaceable units)? (Select TWO)

Which printing technology uses a roll of transparent film containing panels of color that are heated to vaporize inks, which are then applied to specially coated paper?

When adding additional system memory to a computer with a 66 MHz System Bus, which memory speed should be used?

What MUST a technician do when installing a second device on the same IDE controller with an existing device?

In which two situations is it NOT advisable to wear a grounding strap while working on a PC? (Select TWO)

What is the Front Side Bus speed of the AMD Athlon XP 2100+ processor?

After replacing an ink cartridge in a printer, no printing occurs. What are two possible causes of the problem? (Select TWO)

A client wants to set up a small network in the office. It needs to be the fastest possible to run an application. What should you recommend?

How should CD-ROM media be cleaned?

A technician must enable Int13h support on a SCSI controller card in order to use which device?

A client wants to connect a digital camera to a desktop computer system. What are the two MOST common interface types found on digital cameras? (Select TWO)

Which two of the following allow you to use a laptop with most of the peripheral connections of a desktop system? (Select TWO)

What effect can Caller ID devices on a phone line used by an analog 56 Kbps modem have on modem connections? (Select TWO) ActualTests.com

On modern systems, COM2 is not often used. It often ties up much needed resources. If disabled, which IRQ is freed for other devices?

A CMOS "Checksum" error appears during bootup. What is the MOST likely cause?

When does the CMOS lose the setup information for a computer?

Which type of printer melts ink sticks and sprays the melted ink onto a rotating drum, which then transfers the ink to a sheet of paper?

What is the BEST way to prevent ESD (electrostatic discharge) when handling electronic components?

How should CD-ROM media be cleaned?

What is the total number of devices that can connect to an IEEE 1394 (FireWire) Port?

Which three network protocols are typically used in Windows 9x, Windows 2000, and Windows XP networks? (Select THREE)

Why can multiple SCSI devices work on the same channel?

How many pin contacts are on a RIMM module?

A client wants to set up a small network in the office. It needs to be the fastest possible to run an application. What should you recommend?

Which two of the following motherboard components are FRUs (field replaceable units)? (Select TWO)

A technician is installing an IP client connecting to a file server. The client cannot communicate with the server, but other workstations can. The Device Manager shows the NIC (ne...

When adding additional system memory to a computer with a 66 MHz System Bus, which memory speed should be used?

When replacing the Master ATA hard drive in a desktop unit, to ensure proper function the replacement hard drive should:

What should be used to extinguish a computer fire?

What is the maximum transfer speed of ATA 33?