Refer to the exhibit. A new device, PanelView, has been added to the network. See the table for device details: All devices are able to ping their default gateway and all other devices except…

Refer to the exhibit. A new device, PanelView, has been added to the network. See the table for device details:

All devices are able to ping their default gateway and all other devices except PanelView. PanelView can only ping its default gateway. After the administrator has done some investigation they have discovered the following information:

L3SW1# show run interface interface Vlan1 no ip address shutdown ! interface Vlan191 ip address 10.10.27.125 255.255.255.192 ip helper-address 165.28.96.96 ip helper-address 165.28.32.235 no ip redirects standby 191 ip 10.10.27.126 standby 191 priority 120 standby 191 preempt delay minimum 90 no ip route-cache ! interface Vlan398 ip vrf forwarding mosaic ip address 10.15.153.203 255.255.255.0 ip helper-address 10.15.154.252 ip helper-address 10.1.0.252 standby 98 ip 10.15.153.202 standby 98 priority 120 standby 98 preempt delay minimum 90 ! interface Vlan399 ip vrf forwarding mosaic ip address 10.15.154.203 255.255.255.0 ip helper-address 10.1.0.252 ip helper-address 10.1.1.252 standby 99 ip 10.15.154.254 standby 99 priority 120 standby 99 preempt delay minimum 90 ! L3SW1# show ip route connected 10.0.0.0/8 is variably subnetted, 1149 subnets, 17 masks C 10.10.27.64/26 is directly connected, Vlan191 C 10.10.31.254/32 is directly connected, Loopback1 What is preventing PanelView from pinging the other endpoints in the network?