200-401 · Question #69
Which two statements are correct for a safe wiring installation to the terminal block of the switch or endpoint? (Choose two.)
The correct answer is C. Verify that the DC power circuit includes an overcurrent protective device that limits the DC E. Connect the positive 24 VDC conductor to the V terminal and connect the negative 24 VDC return. Options C and E are correct because they reflect two non-negotiable electrical safety fundamentals: the DC circuit must include an overcurrent protective device (such as a fuse or breaker) to prevent damage or fire from excess current, and the polarity must be wired correctly…
Question
Which two statements are correct for a safe wiring installation to the terminal block of the switch or endpoint? (Choose two.)
Options
- AInsert a green ground wire into the terminal block that is marked RT for return.
- BVerify that DC power is live and within 24 VDC voltage range before starting wiring.
- CVerify that the DC power circuit includes an overcurrent protective device that limits the DC
- DBecause this is a low-voltage DC circuit, anyone can install this wiring without electrical training or
- EConnect the positive 24 VDC conductor to the V terminal and connect the negative 24 VDC return
- FA ground wire can optionally be connected to the screw terminal on the front of the switch.
How the community answered
(26 responses)- A4% (1)
- B4% (1)
- C85% (22)
- F8% (2)
Explanation
Options C and E are correct because they reflect two non-negotiable electrical safety fundamentals: the DC circuit must include an overcurrent protective device (such as a fuse or breaker) to prevent damage or fire from excess current, and the polarity must be wired correctly - positive 24 VDC to the V terminal and the negative return conductor to the RT terminal.
Why the distractors are wrong:
- A is wrong because the RT terminal is the negative DC return, not a protective earth ground - inserting a green ground wire there would mislabel the circuit and create a safety hazard.
- B is wrong because you must de-energize the circuit before wiring; connecting to a live circuit risks shock, arc flash, and equipment damage.
- D is wrong because low-voltage DC circuits still require qualified personnel - many jurisdictions legally require it, and low voltage does not eliminate risk.
- F is wrong because grounding is generally mandatory, not optional, for equipment safety and code compliance.
Memory tip: Remember "Power Off, Polarity On, Protect Overcurrent" - before touching terminals, confirm power is OFF, wire with correct polarity (E), and ensure overcurrent protection exists (C). Any answer suggesting live wiring, optional grounding, or no training requirement is a red flag.
Topics
Community Discussion
No community discussion yet for this question.