When troubleshooting the client boot process, you notice the following scenario: What is the most likely reason for this?

Question

Exhibit

Options

• AThis error could occur if another DHCP server is responding to the client.
• BThis error could occur if the switch has auto-negotiation disabled.
• CThis error could occur when you try to use a x86 Automated Installer server to boot a SPARC
• DThere is an HTTP version mismatch.
• EThis cannot occur if there is no DHCP server configured yet, so you need to configure one first.

• A
  79% (37)
• C
  6% (3)
• D
  11% (5)
• E
  4% (2)

Explanation

Boot Load Failed If the AI client starts downloading the boot_archive, but then fails with the error, "Boot load failed," that indicates that the client DHCP information is configured incorrectly. Rebooting with command: boot net:dhcp - install Boot device: /pci@7c0/pci@0/network@4:dhcp File and args: 1000 Mbps FDX Link up HTTP: Bad Response: 500 Internal Server Error Boot load failed This error could happen if another DHCP server is responding to the client. Check the DHCP configuration for this client. If the configuration appears to be correct, determine whether there is another DHCP server in the subnet.

No community discussion yet for this question.