1Y0-350 Exam Questions
128 real 1Y0-350 exam questions with expert-verified answers and explanations. Page 1 of 3.
- Question #1
Scenario: For security reasons, the NSIP needs to be configured to only be accessible on interface 0/1, which is VLAN 300. The NSIP address is 10.110.4.254 and the subnet mask is 2...
- Question #2
Why would an engineer want to specify a TCP Profile for a specific service group?
- Question #3
A network engineer wants to optimize a published load balanced SSL virtual server for WAN connection with long delay, high bandwidth with minimal packet drops. What would the netwo...
- Question #4
Scenario: The NetScaler is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication serv...
- Question #5
Some SSL certificate files may be missing from a NetScaler appliance. Which directory should an engineer check to determine which files are missing?
- Question #6
Scenario: An engineer has been hired to manage the content-switching configurations on the NetScaler. The user account for this engineer must have the standard rules that apply to...
- Question #7
A network engineer needs to configure smart card-based authentication on NetScaler Access Gateway. Which type of authentication policy could the engineer configure in order to acco...
- Question #8
Scenario: The network engineer has created a monitor and bound it to a service group containing four web servers to verify that the web application responds. During routine mainten...
- Question #9
Scenario: An engineer is configuring services to allow load balancing of backend web servers on the internal network. The engineer bound multiple monitors to the first service, but...
- Question #10
What should a network engineer configure to set high availability for a load balanced virtual server?
- Question #11
Scenario: A NetScaler engineer is adding a new SSL certificate to a NetScaler device. During the process the engineer receives an error message: "Certificate with key size greater...
- Question #12
Scenario: A network engineer needs to generate a certificate on the NetScaler appliance. The environment requires a private key with 4096-bit encryption. To generate a new SSL cert...
- Question #13
Scenario: An engineer has configured an SSL virtual server and has bound a service group of type HTTP containing several servers. The service group is UP but the virtual server is...
- Question #14
Users have reported that they are receiving a confusing error message related to SSL sessions when connecting from older browsers. How could the network engineer present this error...
- Question #15
A network engineer must determine which SSL protocols are enabled on a virtual server named SSL01. Which command could the engineer run to see this information?
- Question #16
The security department just conducted a penetration test on the published virtual servers and all of the SSL virtual servers returned the result "Allowed changing to weak certific...
- Question #17
Which policy expression must an engineer use to enable compression for javascript files?
- Question #18
Which expression must an engineer use to prevent compression of Cascading Style Sheets?
- Question #19
The purpose of pre-fetch in integrated caching is to automatically __________. (Choose the correct option to complete the sentence.)
- Question #20
What is the purpose of the flash cache option in integrated caching?
- Question #21
Scenario: A network engineer has created two selectors to use to populate a cache group in integrated caching. One selector, "Hit," will determine what to add to the group. The oth...
- Question #22
Scenario: An organization has recently been penetration-tested by a security company. The findings have indicated that the NetScaler device is responding to requests revealing web...
- Question #23
Scenario: Company Inc. wants to tag incoming requests with a header that indicates which browser is being used on the connection. This helps the server keep track of the browsers a...
- Question #24
Which step could a network engineer take to prevent brute force logon attacks?
- Question #25
A network engineer should enable the Rate Limiting feature of a NetScaler system to mitigate the threat of __________ attack. (Choose the correct option to complete the sentence.)
- Question #26
Which NetScaler feature could be used to stall policy processing to retrieve information from an external server?
- Question #27
An engineer has bound three monitors to a service group and configured each of the monitors with a weight of 10. How should the engineer ensure that the members of the service grou...
- Question #28
A network engineer has noted that the primary node in an HA pair has been alternating as many as three times a day due to intermittent issues. What should the engineer configure to...
- Question #29
The disk is full on a NetScaler appliance but NO alerts were generated by the SNMP traps. What is the likely cause of this failed alert?
- Question #30
What type of protocol does AppFlow use for reporting?
- Question #31
Scenario: A network engineer monitoring an HTTP service-related issue needs to view only the relevant data pertaining to the service being monitored. The IP address of the back-end...
- Question #32
Scenario: A NetScaler environment uses two-factor authentication and the second authentication method is AD. A user logs in to the environment but does NOT receive access to the re...
- Question #33
A NetScaler is configured with two-factor authentication. A user reported that authentication failed. How can an engineer determine which factor of the authentication method failed...
- Question #34
Scenario: A NetScaler high availability (HA) pair has the following interfaces connected: 1/1 - Test network 1/2 - Production network The network engineer needs to re-cable the tes...
- Question #35
Scenario: A network engineer has modified the configuration of a content-switching virtual server, Website_main, because a second content-switching server that is capable of handli...
- Question #37
Scenario: A network engineer needs to add an NTP server to a NetScaler appliance. The NTP service is configured on 10.10.1.49. Which command should the network engineer use within...
- Question #38
A network engineer has enabled USIP and USNIP and set a unique IP address as the source IP using the proxyIP parameter on an INAT policy. Which is the correct order of precedence f...
- Question #39
Scenario: An engineer configures two NetScaler appliances in a high availability (HA) pair. As part of a monthly health check, the engineer attempts to log on to the second node of...
- Question #40
A public SSL certificate on a virtual server is about to expire and the NetScaler engineer needs to renew the certificate before it expires. Which step must the engineer take to re...
- Question #41
An environment network has: - High bandwidth - Low packet loss - High Round-Trip Time (RTT) Which TCP profile should an engineer configure for the environment described?
- Question #42
Scenario: A network engineer needs to provide web server administrators with access to monitoring and reporting after changing the default root password during the initial setup of...
- Question #43
Scenario: An engineer has configured a virtual server that users access using HTTP port 80. The web application also uses TCP port 81 and 8080 for non-user access. The engineer wou...
- Question #44
Which step is required to ensure that SSL traffic is passed through the NetScaler to backend services without processing SSL on the NetScaler appliance?
- Question #45
A NetScaler engineer would like to present different web pages to a user based on the device and browser type from which they are connecting. Which responder policy could assist wi...
- Question #46
Scenario: A user browses to a page and is presented with a warning that he is trying to enter a web site with an untrusted certificate. The network engineer had added the correct c...
- Question #47
A network engineer is investigating issues and suspects that a new server that has been recently added to the environment has the same IP address as a virtual server that is config...
- Question #48
Scenario: A network engineer created an SSL virtual server and enabled smart card on it. The engineer tried browsing to the server and noticed the back-end system could NOT see the...
- Question #49
How could an engineer configure a monitor to ensure that a server is marked as DOWN if the monitor test is successful?
- Question #50
Scenario: A network engineer suspects that there is a duplex mismatch in the network configuration. The NSIP address is 10.10.1.206. How can the administrator verify the configurat...
- Question #51
Scenario: Primary NetScaler (NS1) is licensed for 10000 Maximum ICA users and 305 Access Gateway users. Secondary NetScaler (NS2) is licensed for 10000 Maximum ICA users and five A...