156-915.76 · Question #135
You are establishing a ClusterXL environment, with the following topology: VIP internal cluster IP = 172.16.10.3; VIP external cluster IP = 192.168.10.3 ClusterMember1:4NICs,3enabled…
The correct answer is A. There is an IP address conflict. See the full explanation below for the reasoning.
Question
You are establishing a ClusterXL environment, with the following topology:
VIP internal cluster IP = 172.16.10.3; VIP external cluster IP = 192.168.10.3 ClusterMember1:4NICs,3enabled: hme():192.168.10.1/24, hmel: 10.10.10.1/24, qfe2: 172.16.10.1/24 Cluster Member 2: 5 NICs, 3 enabled; hme3: 192.168.10.2/24, hmel: 10.10.10.2/24, hme2: 172.16.10.2/24 External interfaces 192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same VLAN switch. Internal interfaces 172.16.10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the synchronization network. The SmartCenter Server is located on the internal network with IP 172.16.10.3. What is the problem with this configuration?
Options
- AThere is an IP address conflict.
- BCluster members cannot use the VLAN switch. They must use hubs.
- CThe Cluster interface names must be identical across all cluster members.
- DThe SmartCenter Server must be in the dedicated synchronization network, not the internal network.
How the community answered
(22 responses)- A73% (16)
- B5% (1)
- C5% (1)
- D18% (4)
Community Discussion
No community discussion yet for this question.