150-820 Exam Questions
207 real 150-820 exam questions with expert-verified answers and explanations. Page 1 of 5.
- Question #1
What is the name of the ASIC used in Brocade VDX 6430?
- Question #2
In NOS 3.x and later, how many maximum ISLs can exist in a trunk group between a Brocade VDX 8710 and a Brocade Mi10K in a Brocade VCS Fabric?
- Question #3
Which legacy Brocade switch requires GBICs?
- Question #4
Which Brocade code platform will interoperate with NOS v4.1?
- Question #5
Which vendor's Ethernet fabric solution will directly join a Brocade VCS Fabric?
- Question #6
After connecting a new server to your four-switch Brocade VCS Fabric, you notice that all the switches have learned the new server's MAC address. Which VCS feature is responsible f...
- Question #7
Which two statements are true about a Brocade VCS Fabric operating in logical chassis mode? (Choose two.)
- Question #8
You have a four-switch Brocade VCS Fabric operating in fabric mode. You make an interface level configuration change on the principal switch. Which statement is true?
- Question #9
You have three new Brocade VDX switches that are properly configured to join into a single Brocade VCS Fabric. You add two links in the same port group between each of the three sw...
- Question #10
Which two statements are true about Network OS integration with VMware vCenter? (Choose two.)
- Question #11
What are two valid uses of the NETCONF protocol? (Choose two.)
- Question #12
Your Brocade VCS Fabric consists of two Brocade VDX 8770s and 10 Brocade VDX 6740s. The current fabric is running in VCS fabric mode. You need to add a VLAN on one switch and have...
- Question #13
A multi-destination tree is used for which type of traffic?
- Question #14
Which two statements are true when traffic is transmitted over a fabric ISL trunk? (Choose two.)
- Question #15
During the Brocade VCS Fabric distributed MAC learning process, what information is learned and shared throughout the fabric? (Choose three.)
- Question #16
You are an administrator at a cloud-based provider. You need a solution that provides L3 multi- tenancy to enable separate resources to be used by your customers. Which feature wou...
- Question #17
You are using PBR in your Brocade VCS Fabric and you would like to selectively modify and route the IP packets in the hardware. Which two would you configure? (Choose two.)
- Question #18
A Brocade VCS Fabric is running NOS 4.1.1 on two Brocade VDX 8770s and four Brocade VDX 6740s in logical chassis mode. You are required to deploy FCoE servers and Layer 3 features...
- Question #19
Your Ethernet fabric is running NOS 4.1.1 on two Brocade VDX 8770s and four Brocade VDX 6730s in fabric cluster mode. You are required to deploy servers connected to the VDX switch...
- Question #20
You are asked to connect a Brocade VDX 8770 to a Brocade VDX 6740 in logical chassis mode using four 40 Gbps links. Which license is required?
- Question #21
You are building a Brocade VCS Fabric that includes one each of the Brocade VDX 8770, VDX 6740, VDX 6740T-1G, and VDX 6740T switches. All switches have base licenses. The VDX 8770...
- Question #22
Your data center will include a Brocade VCS Fabric that has a Brocade VDX 8770-4 for access/aggregation and a VDX 8770-8 at the core. You must ensure that both chassis are assemble...
- Question #23
You receive a replacement Brocade VDX 6740T that has no management IP address configured on it. Which port would you use to set the management IP?
- Question #24
You have connectivity from a top of rack Brocade VDX 6740 to two Brocade VDX 8770s in the core. Ports 1-16 are connected to one VDX 8770, and ports 49-52 are connected to the other...
- Question #25
What are three Brocade VCS Fabric core technology principles? (Choose three.)
- Question #26
Which three features are provided when you enable Brocade NOS Virtual Fabrics? (Choose three.)
- Question #27
You want to enable a Service Virtual Fabric to provide 802.1Q VLAN virtualization. Which two statements are correct? (Choose two.)
- Question #28
Which statement is true regarding Brocade NOS Virtual Fabrics?
- Question #29
You are using VxLANs to extend your L2 domains over your L3 networks. What is added to the VxLAN to do this?
- Question #30
Which Brocade VCS Fabric mode is required to support communication to an NSX controller?
- Question #31
What allows L2 communication to extend over L3 networks?
- Question #32
You are asked to deploy servers with a single adapter that is attached to your Brocade VCS Fabric to communicate with FC SAN attached storage. Which two components are required? (C...
- Question #33
You are required to deploy servers with a single adapter that are attached to your Brocade VDX 6730 running in Access Gateway mode that will communicate with FC SAN attached storag...
- Question #34
You are required to deploy servers with a single adapter that are attached to your Brocade VCS Fabric to communicate with FC SAN attached storage. What is required?
- Question #35
Which two statements are true regarding Access Gateway mode on the Brocade VDX 6730? (Choose two.)
- Question #36
Referring to the exhibit, in which mode of operation is the active switch participating? VDX11# show vcs detail Config Mode : Distributed VCS ID : 10 Total Number of Nodes : 3 Node...
- Question #37
You are connecting your Brocade VCS Fabric to a native Brocade Fibre Channel Router (FCR) using FC ports on one of your Brocade VDX switches. Which two port types are supported? (C...
- Question #38
You need to provision FCoE connectivity for the servers shown in the exhibit. Which two configuration actions must be taken? (Choose two.)
- Question #39
You have configured your Brocade VCS Fabric to connect to a third-party switch using multiple links from two RBridges in your fabric. From the fabric, you configure a static vLAG f...
- Question #40
You are deploying a new Brocade VCS Fabric. The fabric must support IP routing both within the fabric and to external routers. Which two protocols would be used? (Choose two.)
- Question #41
You are planning the integration of a new Brocade VCS Fabric into your legacy spanning tree environment. In which two scenarios would configuring STP be appropriate? (Choose two.)
- Question #42
Referring to the exhibit, which two configurations are valid? (Choose two.)
- Question #43
Your customer wants their Brocade VCS Fabric to participate in a loop-free network when connecting to other switches. Which three protocols are supported? (Choose three.)
- Question #44
You are connecting an existing Ethernet network to a Brocade VCS Fabric. You want to prevent any Layer 2 loops from forming. Which two features would be used on the Brocade VDX to...
- Question #45
You want to design a Brocade VCS Fabric that can automatically classify and prioritize traffic for NAS storage. Which two platforms would be used? (Choose two.)
- Question #46
When creating a vLAG on a Brocade VDX, which statement is correct?
- Question #47
Which three statements are correct regarding a vLAG? (Choose three.)
- Question #48
Which three parameters are required when configuring a working vLAG on Brocade VDX switches? (Choose three.)
- Question #49
What are three benefits to the 802.3ad Link Aggregation Control Protocol? (Choose three.)
- Question #50
You have a server with four Ethernet interfaces and want to aggregate your links into a single bundle across two Brocade VDX switches. Which two statements are true? (Choose two.)