050-SEPROSIEM-01 · Question #67
To identify critical NAS errors,
The correct answer is C. Log in to the EMC Celerra Manager and review the status and logs. Critical NAS errors on EMC Celerra systems are identified through the EMC Celerra Manager, which provides a centralized GUI for status monitoring and log review.
Question
To identify critical NAS errors,
Options
- ALog in to the Control Station and review the status and logs
- BAccess the switch command-line with administrative credentials
- CLog in to the EMC Celerra Manager and review the status and logs
- DLog in to the Control Station and go to the /nas/sbin/nas_logs directory
How the community answered
(49 responses)- A6% (3)
- B4% (2)
- C78% (38)
- D12% (6)
Why each option
Critical NAS errors on EMC Celerra systems are identified through the EMC Celerra Manager, which provides a centralized GUI for status monitoring and log review.
Logging into the Control Station and reviewing logs is a valid diagnostic step, but the primary tool for identifying critical errors on Celerra is the dedicated Celerra Manager application.
The network switch CLI is not relevant to NAS error identification and would only provide network-layer diagnostics.
EMC Celerra Manager is the primary graphical management interface for EMC Celerra NAS systems and provides administrators with a consolidated view of system status, alerts, and event logs. Using this tool is the recommended and most efficient method for identifying and diagnosing critical errors, as it aggregates log data and presents actionable status information in a structured interface.
The /nas/sbin/nas_logs directory is a lower-level file system path and is not the standard recommended method for identifying critical errors compared to the Celerra Manager.
Concept tested: EMC Celerra NAS error identification and log review
Topics
Community Discussion
7
Fatima Z.Nov 29, 2025The answer is C. The EMC Celerra Manager is your one-stop GUI for NAS health, it gives you a clean dashboard view of both status AND logs in one place, so picture "C for Celerra, C for Check-the-errors" and you will never mix it up with just poking around a Control Station terminal.
Orla P.Dec 12, 2025The Control Station is a real component in the Celerra architecture and you can technically poke around its filesystem, but the exam is testing whether you know the right tool for the job, not just a tool that could work in a pinch. Option D trips people up because /nas/sbin/nas_logs sounds specific and technical, which feels like it must be correct, but navigating raw directories on the Control Station is not the supported or recommended path for identifying critical errors in normal operations. Option C points you to the EMC Celerra Manager, which is the purpose-built management interface that aggregates status and log information in one place and is what Dell EMC documentation consistently points administrators toward for health monitoring. So here is what I want you to think about before test day: if you had to explain to a junior admin the difference between what the Celerra Manager shows you versus what you would find by logging directly into the Control Station and browsing directories, could you articulate why one is the preferred first stop for critical error identification?
Ingrid P.Dec 30, 2025My first instinct was A because the Control Station is the underlying Linux management server on Celerra and you absolutely can review logs there, so it felt technically correct. What pushed me toward C is that the EMC Celerra Manager is the purpose-built GUI tool that aggregates system health, alerts, and log data in a structured, navigable way, which is exactly what you want when triaging critical NAS errors rather than digging through raw log paths manually. The distinction the exam is testing is the difference between "you could do this" and "this is the correct administrative interface for the task." I made a card for this one with the front being the scenario of identifying critical NAS errors and the back being Celerra Manager specifically, because the Control Station distractor is strong enough to burn you if you haven't drilled the exact tool-to-task mapping.
Toby R.Jan 2, 2026The card idea is smart, and I would add the trigger phrase "most appropriate tool" or "recommended interface" to the back side too, because that wording on the exam is almost always their signal that they want the purpose-built management GUI and not the underlying OS access you technically could use.
Toby R.Dec 31, 2025Control Station is exactly where you review NAS status and logs, done it live.
Fatima Z.Jan 2, 2026Hey Toby, love the confidence, but C is the move here because Control Station handles management tasks while option C is the dedicated spot for monitoring NAS health and pulling logs, think of it as the difference between the cockpit and the instrument panel. Quick hook to lock it in: "Status and Logs, pick C like a Clock" because you check the clock to see what is happening, not to fly the plane.
Brenda K.Dec 28, 2025Saw this exact flavor of question on my sit and flagged it as a quick win the second I read it, because A and D both say Control Station which is a trap for anyone who half-studied, and B is a nonsense distractor you should burn zero seconds on. The EMC Celerra Manager is the dedicated GUI for reviewing NAS status and logs, so C is your answer, mark it and move on in under 30 seconds.